Mcb Led Status Report - Vision Fitness Vision Series Service Manual

MCB LED Status Report

Product Type :...............................
Number :........................
When power-up the treadmill the MCB LED status is :
AC(*115V)Light
LED On :
LED Off :
MTR Light
LED On :
LED Off :
LED Dim:
ILT1 Light (JET7000)
LED On :
LED Off:
When you press the UP or DOWN key, the LED status is :
Up Light
LED On :
LED Off:
*These LEDs are only for JET-7000 MCB
In order to fill-out this Report properly please use the PWM MCB CHART and MCB
LED-aided troubleshooting which you can find in the Service Manual.
Please fill-out this Report at the moment before repairing the problem.
Serial number * MCB : .......................................
by : ...............................
Approximate hours of use : .......................................... Company
Name : ................................
Serial
18V Light
LED On :
LED Off :
I-Limit Light
LED On :
LED Off:
ILT2 Light (JET7000)
LED On :
LED Off :
Dn Light
LED On :
LED Off :
11(*12)V Light
LED On :
LED Off :
PMW Light
LED blinking:
LED Off :
Reported
Revision: 1.0 Date: 1999-09-01