Vision Fitness Vision Series Service Manual page 39

PCB REPLACEMENT
Tools required:
Philips screwdriver
T-handle key (5mm)
Procedure:
(T9250/93500/9450HRT)
1. Use the T-handle key to loose the
screws of the handle bar. Then
remove the handle bar.
2. Loose the screws of the console upper
cover. Then Knock the console upper
cover carefully and remove it.
3. Unplug the cables connecting to the
PCB.
4. With the screwdriver remove the PCB.
5. Replace the PCB with a new one.
6. Reverse step 1-4 to install all parts.
7-2