Extreme Networks Summit X450a-24tDC Hardware Installation Manual page 61

Example: Two active EPS-600LS modules in an EPS-C
a Unplug one EPS-600LS unit from its power source.
PoE power is automatically reduced to 370 watts and the internal PSU is enabled providing
redundant 370 watt PoE power.
b Wait at least two seconds before disconnecting the remaining EPS-600LS unit.
c Unplug the second EPS-600LS unit from its power source.
The internal PSU is already enabled and provides uninterrupted 370 watts of PoE power.
NOTE
After an EPS-600LS unit is disconnected from its power source, it may be removed from the EPS-C. See
"Removing an EPS-600LS Power Module" on page 115
d Disconnect the EPS-C from the switch.
Summit Family Switches Hardware Installation Guide
EPS-600LS External Power Module
for complete disconnect and removal details.
61