Extreme Networks Summit X450a-24tDC Hardware Installation Manual page 114

Installing Summit External Power Supplies
Figure 80: Securing the EPS-600LS to the EPS-C Chassis
O.T.P
DC OK
! See Manual
AC OK
5 Connect the AC power cord to the AC connector on the EPS-600LS unit (see
Use the cable clip on the EPS-600LS unit to hold the AC power cord in place (see
CAUTION
The EPS-600LS unit does not have a switch for turning the unit on and off. Disconnect power to the EPS-600LS
unit by removing the plug from the electrical outlet. Make sure that this connection is easily accessible to you.
Figure 81: Installing the Redundant Power Cord
Cable Clip
O.T.P
DC OK
! See Manual
AC OK
6 Connect the other end of the AC power cord to the electrical outlet (see
114
Tighten Screws
EPS-600LS
Power Cord
EPS-C_05A
To AC
EPS-C_06A
Summit Family Switches Hardware Installation Guide
Figure 81).
Figure 81).
Figure 81).