Extreme Networks Summit X450a-24tDC Hardware Installation Manual page 157

Table 27: Summit X450a Series Switch Technical Specifications (Continued)
Power supply cord gauge
Heat dissipation, Watts, BTU
Power consumption, Watts, BTU
Summit X450a-24xDC Power
Operational voltage range
Nominal input ratings
Input current
Power supply cord type
Power supply input socket
Power cord input plug
Power cord wall plug
Power supply cord gauge
Heat dissipation, Watts, BTU
Power consumption, Watts, BTU
Safety Standards
North American Safety of ITE
European Safety of ITE
International Safety of ITE
EMI/EMC Standards
North America EMC for ITE
European EMC standards
International EMC certifications
Country-specific
Summit Family Switches Hardware Installation Guide
2
18 AWG (0.82 mm ) copper stranded
98 W, 334.4 BTU/hr
98 W, 334.4 BTU/hr
–36 to –72 V
–48 V , 2.5 A
2.5 A @ -36 V (low-line)
1.25 A @ -72 V (high-line)
DC
TYCO PN 206061-1
TYCO PN 206060-1
None provided
14 AWG
98 W, 334.4 BTU/hr
98 W, 334.4 BTU/hr
UL 60950-1:2003 1st Ed., Listed Device (US)
CSA 22.2#60950-1-03 1st Ed.(Canada)
Complies with FCC 21CFR 1040.10 (US Laser Safety)
CDRH Letter of Approval (US FDA Approval)
IEEE 802.3af 6-2003 Environment A for PoE Applications
EN 60950-1:2001+A11
EN 60825-1+A2:2001 (Lasers Safety)
TUV-R GS Mark by German Notified Body
73/23/EEC Low Voltage Directive
CB Report & Certificate per IEC 60950-1:2001 Country Deviations
AS/NZX 60950-1 (Australia /New Zealand)
FCC CFR 47 part 15 Class A (USA)
ICES-003 Class A (Canada)
EN 55022:1998 Class A
EN 55024:1998 Class A includes IEC 61000-4-2, 3, 4, 5, 6, 8, 11
EN 61000-3-2,3 (Harmonics & Flicker)
ETSI EN 300 386:2001 (EMC Telecommunications)
89/336/EEC EMC Directive
CISPR 22:1997 Class A (International Emissions)
CISPR 24:1997 Class A (International Immunity)
IEC/EN 61000-4-2 Electrostatic Discharge, 8kV Contact, 15kV Air,
Criteria A
IEC/EN 61000-4-3 Radiated Immunity 10V/m, Criteria A
IEC/EN 61000-4-4 Transient Burst, 1kV, Criteria A
IEC/EN 61000-4-5 Surge, 2kV L-L, 2kV L-G, Level 3, Criteria A
IEC/EN 61000-4-6 Conducted Immunity, 0.15-80MHz, 10V/m unmod.
RMS, Criteria A
IEC/EN 61000-4-11 Power Dips & Interruptions, >30%, 25 periods,
Criteria C
VCCI Class A (Japan Emissions)
AS/NZS 3548 ACA (Australia Emissions)
CNS 13438:1997 Class A (BSMI-Taiwan)
MIC Mark, EMC Approval (North Korea)
Summit X450a Series Switches
157