Summit X450E-24P Switch - Extreme Networks Summit X450a-24tDC Hardware Installation Manual

Summit Family Switches

Summit X450e-24p Switch

The front panel of the Summit X450e-24p switch
Twenty fixed autosensing 10/100/1000 BASE-T PoE ports (ports 1-20) that provide high-density
●
copper connectivity and a full 15.4 Watts of PoE per port
Four combination ports (ports 21-24) using RJ-45 connectors and SFPs to provide 4 Gbps of copper
●
or fiber connectivity
For information about SFPs, see the Extreme Networks Pluggable Interface Modules Installation Guide.
NOTE
All 24 ports can provide PoE power.
LEDs to indicate port status and switch operating conditions.
●
For a description of the LEDs and their operation, see
Switch LEDs" on page
Stack number indicator showing the position of this switch in a stacked configuration.
●
Serial console port used to connect a terminal and perform local management.
●
Figure 43: Summit X450e-24p Switch Front Panel
The rear panel of the Summit X450e-24p switch
Slot for one of the following Summit option cards:
●
Summit XGM2-2xn option card, which allows you to add up to two 10-Gigabit XENPAK modules
■
Summit XGM2-2xf option card, which allows you to add up to two 10-Gigabit XFP modules
■
For information about these Summit option cards, see
page 120 or
Management port with associated LEDs
●
Two high-performance stacking ports with associated LEDs
●
Redundant power input connector for optional connection to an external redundant power supply
●
with full PoE power support, either the EPS-LD External Power Supply Unit (Model 45019) or the
EPS-500 External Power Supply (Model 10911). The connecting redundant power supply cable is
shipped with the power supply.
See "EPS-LD External Power Supply Unit" on page 57
●
page 57 for more information.
AC power input socket
●
The power supply operates from 100 VAC to 240 VAC.
50
53.
10/100/1000 Mbps PoE ports
PORTS 1 -24 1 2
POWERED (AMBER) ON=LINK NO POWER (GREEN) ON=LINK
FLASHING=ACTIVITY FLASHING=ACTIVITY
OFF=NO LINK/DISABLED OFF=NO LINK/DISABLED
10G ALTERNATE AMBER/GREEN=PWR FAULT
MGMT 1
STACK NO.
FAN 2
Stack
PSU-1 1
PSU-E 2
Stack number
indicator
"Summit XGM2-2xf Option Card" on page
(Figure 43) includes:
"Summit X450, X450a, and X450e Series
3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22
Combination ports
(Figure 44) includes:
"Summit XGM2-2xn Option Card" on
122.
or "EPS-500 External Power Supply Unit" on
Summit Family Switches Hardware Installation Guide
Console
port
23 24 21X 22X 23X 24X
Shared Ports
SH_015B