Summit X150-24p Switch
The front panel of the Summit X150-24p switch
Twenty-four fixed autosensing 10/100BASE-T PoE ports (ports 1–24). In addition to 4 Gbps of
●
high-density copper connectivity, these ports also provide a full 15.4 Watts of PoE per port.
Two combination ports (ports 25–26) using RJ-45 connectors and SFPs to provide 2 Gbps of copper
●
or fiber connectivity
For information about SFPs, see the Extreme Networks Pluggable Interface Modules Installation Guide.
LEDs to indicate port status and switch operating conditions.
●
For a description of the LEDs and their operation, see
page
21.
Serial console port used to connect a terminal and perform local management.
●
Figure 3: Summit X150-24p Switch Front Panel
The rear panel of the Summit X150-24p switch includes:
Ethernet management port with associated LEDs
●
Redundant power input connector for use optional connection to the EPS-500 External Power Supply
●
(Model No. 10911) with full PoE power support.
See
"EPS-500 External Power Supply Unit" on page 325
redundant power supply cable is shipped with the EPS-500 unit.
AC power input socket
●
Figure 4: Summit X150-24p Switch Rear Panel
External power
Management port
supply connection
Summit Family Switches Hardware Installation Guide
(Figure
3) includes:
10/100 Mbps ports
Power socket
Summit X150 Series Switches
"Summit X150 Series Switch LEDs" on
Console
port
Combination ports
SH_052A
for more information. The connecting
SH_053
19