Extreme Networks Summit 300-48 Software User's Manual page 48

Managing the Switch
• Cannot issue a
show switch
• Can perform all other commands.
We know from the
users
able to log in, but is unable to perform any commands, because he has no valid profile assigned.
In , a user associated with this profile can use any
PROFILE2
command and the
show management
also know from the
users
The following lists the contents of the file
user Password = ""
Filter-Id = "unlim"
admin Password = "", Service-Type = Administrative
Filter-Id = "unlim"
eric Password = "", Service-Type = Administrative, Profile-Name = ""
Filter-Id = "unlim"
Extreme:Extreme-CLI-Authorization = Enabled
albert Password = "", Service-Type = Administrative, Profile-Name =
"Profile1"
Filter-Id = "unlim"
Extreme:Extreme-CLI-Authorization = Enabled
lulu Password = "", Service-Type = Administrative, Profile-Name =
"Profile1"
Filter-Id = "unlim"
Extreme:Extreme-CLI-Authorization = Enabled
gerald Password = "", Service-Type = Administrative, Profile-Name "Profile2"
Filter-Id = "unlim"
Extreme:Extreme-CLI-Authorization = Enabled
Contents of the file "profiles":
PROFILE1 deny
{
enable *, disable ipforwarding
show switch
}
PROFILE2
{
enable *, clear counters
show management
}
PROFILE3 deny
{
create vlan *, configure iproute *, disable *, show fdb
delete *, configure rip add
}
48
command.
file that this applies to the users
command, but can perform no other functions on the switch. We
file that has these capabilities.
gerald
with support for per-command authentication:
users
and . We also know that
albert lulu
command, the
enable
is
eric
clear counter
Summit 300-48 Switch Software User Guide