Top Command; Contacting Extreme Technical Support - Extreme Networks Summit 300-48 Software User's Manual

Troubleshooting
show debug-trace wireless ports (portlist) [dot1x | radius]
The output of this command is similar to the following:
Port Number
-------------------------------------------------------------------
1:3
To display the configured debug trace level on the Altitude 300, use the following command:
show wireless ports (portlist) debug-trace {detail}
Note that the Altitude 300 and Summit 300 should always display the same configured value. The
output of this command is similar to the following:
Port Trace
--------------------------------------------------------------------
1:3 dot1x
1:3 radius
1:3 mac
1:3 snmp
1:3 wlan-driver
1:3 eth-driver
If you specify the detail parameter, the output is similar to the following:
Wireless Port
Messages Sent
Total Bytes Sent
Messages Suppressed
Other Errors
Trace Description
------------------------------------------------------------------------
dot1x 802.1x Processing
radius Radius Backend
mac Wireless MAC
snmp SNMP Subagent
wlan-driver WLAN Driver
eth-driver ETH Driver

TOP Command

The command is a utility that indicates CPU utilization by process.
top

Contacting Extreme Technical Support

If you have a network issue that you are unable to resolve, contact Extreme Networks technical support.
Extreme Networks maintains several Technical Assistance Centers (TACs) around the world to answer
networking questions and resolve network problems. You can contact technical support by phone at:
• (800) 998-2408
228
Debug
802.1x Processing
Description
802.1x Processing
Radius Backend
Wireless MAC
SNMP Subagent
WLAN Driver
ETH Driver
: 1:3
: 329004
: 12874517
: 96208
: 0
Level
5
Current
5
4
1
1
1
1
CUR MSGS BYTES SUPP
5 3285 1284 96158
4 450 27000 50
1 0 0 0
1 0 0 0
1 0 0 0
1 0 0 0
Summit 300-48 Switch Software User Guide