Configuring the ATM Module
Table 3-15: Changes to Image Commands (continued)
Command
download image [<ipaddress> | <hostname>]
<filename> {primary | secondary}
{slot <slot>}
use image [primary | secondary] {slot <slot>} The slot <slot> option has been added to this
3-50
Description of Change
The slot <slot> option has been added to this
command to support downloading of images to a
specified ATM module. When you enter the
command with this option, the image is
downloaded to the module in the specified slot
rather than to one of the switch's image
partitions.
command to select which image will load on the
module in the specified slot on the next reboot.
Asynchronous Transfer Mode (ATM) Module Installation and User Guide