Configuring The Atm Module - Extreme Networks BlackDiamond 6800 Installation And User Manual

3

Configuring the ATM Module

This chapter describes the ExtremeWare commands that support the ATM module.
Other commands and background information used to configure I/O modules and
switch behavior in a network are documented in the ExtremeWare Software User Guide.
For hardware installation information on the BlackDiamond 6800 series switch, see the
BlackDiamond Hardware Installation Guide.
Documentation for Extreme Networks products is available on the World Wide
Web at the Extreme Networks home page at http://www.extremenetworks.com/.
This chapter includes information on the following topics:
• Basic ATM Module Configuration Information on page 3-2
• Configuring and Monitoring ATM Ports on page 3-9
• Configuring and Monitoring SONET on page 3-14
• Configuring VLAN-Related Attributes on page 3-24
• Configuring Forwarding Database Attributes on page 3-28
• Configuring Spanning Tree Attributes on page 3-28
• Configuring QoS Functions on page 3-29
• Additional ATM Module Support Topics on page 3-45
Asynchronous Transfer Mode (ATM) Module Installation and User Guide 3-1