Table of Contents
Advertisement
In zone menu, you can set a zone and name it, when the speed dome turns to the zone
you set, it will display zone name on the screen (only if "OSD/AREAS->Display -> Zone" is
set as "YES"). Tilt the joystick up and down to scroll through the characters, then tilt left or
right to move to the previous/next position. When finished, tilt the joystick right to go to
"Range" section, and press Enter key to enter Range sub-menu. Use the joystick to move
speed dome to its left position. Press IRIS+ key to save left position setting and go to next
step or press IRIS- to cancel.
ZONE
TITLE
1. ----------------------------
2. ----------------------------
3. ----------------------------
4. ----------------------------
5. ----------------------------
6. ----------------------------
7. ----------------------------
8. ----------------------------
RETURN
Use the joystick to move speed dome to its right position. Press IRIS+ or IRIS- key to save
and return.
MOVE TO LEFT POSITION
IRIS+: SAVE AND NEXT STEP
IRIS-: CANCEL
RANGE
CLR
--------
<┘
[
<┘
]
--------
<┘
[
<┘
]
--------
[
]
<┘
<┘
--------
[
]
<┘
<┘
--------
[
]
<┘
<┘
--------
[
]
<┘
<┘
--------
<┘
[
<┘
]
--------
<┘
[
<┘
]
(diagram 4.10)
ZONE1
(diagram 4.11)
MOVE TO LEFT POSITION
IRIS+: SAVE AND NEXT STEP
IRIS-: CANCEL
MOVE TO RIGHT POSITION
IRIS+/IRIS-: SAVE AND
91
ZONE1
ZONE1
RETURN
Advertisement
Table of Contents
