EverFocus EPTZ3150 User Manual page 57

b. PAN/TILT LIMITS
ON: Turn joystick Left/Right to switch Limits on or off. When Limits is on, press Enter
key to enter AUTO TRACKING LIMIT menu (see diagram 3.18). Turn the joystick
Up/Down to select one of the four following functions and press Enter key to enter
its setting menu.
AUTO TRACKING
START POINT
PAN/TILT LIMITS
MASK ZONE
ZOOM MODE
SET DURATION <┘
ACTION MODE
<┘
SENSITIVITY
<┘
FRAME
RETURN
PAN: In MOVE TO LEFT LIMIT window (see left of diagram 3.19), turn the joystick
to select the position where you wish to set left limit. Press IRIS+ key of
keyboard to enter MOVE TO RIGHT LIMIT window (see right of diagram 3.19).
Turn the joystick to select the position where you wish to set right limit. Press
IRIS+ key of keyboard to save setting and return to previous menu.
MOVE TO LEFT LIMIT
IRIS+: NEXT
IRIS-: RETURN
Note: If tracking start point is outside the limits, the screen will show "START POS
IS OUTSIDE LIMIT. SET START POS" and user has to reset a start position
between left and right limits.
OFF
ON
<┘
OFF
ON
ON
(diagram 3.18)
(diagram 3.19)
AUTO TRACKING LIMIT
PAN
<┘
UPPER
<┘
LOWER <┘
CLEAR PAN <┘
CLEAR UPPER
CLEAR LOWER
RETURN
MOVE TO RIGHT LIMIT
IRIS+: SAVE AND RETURN
IRIS-: RETURN
57
0 – 360
90 degree
0 degree
<┘
<┘