EverFocus EPTZ3150 User Manual page 73

ALARM INPUTS
<┘
ALARM OUTPUTS
<┘
MOTION DETECT <┘
EXIT
a. Turn the joystick Left or Right to select ON for motion detection. A window as below
pops up.
b. Press Enter key to enter Motion Detection Setting. Use the joystick to select motion
area. Turn the joystick Up or Down to select directions, LEFT, RIGHT, UPPER or LOWER.
Turn the joystick Left or Right to adjust the value of motion area. For Left & Right
directions, it is selectable from 0 to 12. For Upper & Lower directions, it is selectable from
0 to 8. There is a color frame showing you the motion detection area you change. Motion 1
is represented by pink, Motion 2 by blue, Motion 3 by green and Motion 4 by yellow. Press
IRIS+ key to save setting and return to previous menu. Press IRIS- to return to previous
menu.
MOTION DETECT INFO
M1: 67 M2: 87
MOTION DETECT 1
MOTION DETECT 2
MOTION DETECT 3
MOTION DETECT 4
SENSITIVITY
INTERVAL TIME (S)
EXIT
(diagram 3.39)
73
OFF
OFF
OFF
OFF
240
1