Tour Mode - EverFocus EPTZ3150 User Manual

5.5. Tour Mode

In the tour mode, you can set a tour for viewing. There are 16 tours can be set, and 16
preset positions in a tour.
One-way tour Mode: Press Tour to enter the tour mode. The system will ask you to
enter the tour number you would like to run, and starts the tour after pressing Enter.
To preset a tour before running is necessary.
Preset a one-way tour: Press Set + Tour to preset a one-way tour. The system will
ask you to enter preset position numbers (The positions need to be preset). After
finish entering all positions, press Stop to quit, and then press Enter to save the
tour.
To-and-fro tour mode: Press Shift + Tour to run a to-and-fro tour. The system will
ask you to enter the tour number you would like to run, and starts the tour after
pressing Enter. To preset a tour before running it is necessary.
Note 1: The difference between the One-way tour mode and To-and-fro tour mode is that
the return modes are different. For example: There is a tour with 3 preset positions 1, 2
and 3. The camera runs 1→2→3→1→2→3 in the One-way tour mode, and
1→2→3→2→1 in the To-and-fro tour mode.
Note 2: You could set a pattern tour. Press Set + Tour, and input 0, press Enter. Sway the
joystick to record the entire tour. Press Stop to stop recording tour. To view this pattern tour,
simply press Tour, and input tour number 0.
121