44/83
Bosch Rexroth AG
Module Design
6.2.5
Connection Module VAC 30.2
General Information
Rexroth IndraControl VAM 11.1/41.1 Machine Control Panels
1
①
Cut-outs of the 22.5 mm sized control and indicator units
Fig.6-7:
Cut-out position of the 22.5 mm sized control and indicator units
Device variants with the abbreviation "AB" in the type designation code have a
VAC 30.2 connection module for a VEH 30.1/30.2 or VCH 08.1 IndraControl
hand-held terminal.
At the rear side all interfaces for wiring the connection module firmly with the
control are provided. The front panel features a 17-pin female connector with
screwed plug. The IndraControl VEH 30.1/30.2 or VCH 08.1 hand-held termi‐
nals can be comfortably connected.
Fig.6-8:
VAC 30.2 connection module for VEH 30.1/30.2 or VCH 08.1 hand-held
terminals
DOK-SUPPL*-VAM*11/41**-PR03-EN-P