Operation With A Pabx - Gigaset AS690IP User Manual

Extending the functionality of the phone

Operation with a PABX

The following settings are only necessary when your PABX requires them (
user guide).
Changing pause after line seizure
Setting the access code
Set the access code (e.g. "0") for dialling using the fixed line network and using VoIP.
¤
Menu Settings
Fixed line network:
VoIP:
Rule:
Save:
Setting the flash time
¤
Menu Settings
time OK
You can set the length of the pause inserted between pressing the Talk key
the phone number.
¤
Menu
flashes: 1 = 1 sec.; 2 = 3 sec.; 3 = 7 sec.
Changing pause after recall key
¤
Menu
flashes: 1 = 800 ms; 2 = 1600 ms; 3 = 3200 ms
52
OK Telephony
¤
Access ext line with:
(max. 3 digits)
¤
Access IP line with:
(max. 3 digits)
¤
For Use
Call Lists: The access code will only prefix numbers from a list (list
of answered calls, list of missed calls, SMS list).
All Calls: The access code prefixes all numbers dialled.
Off: The access code is deactivated and does not prefix any tele-
phone number.
¤
OK
OK Telephony
Enter digit
OK Access Code
Enter or change the access code
Enter or change the access code
to select when the access code is dialled
OK Recall
The digit for the current pause length
OK
The digit for the current pause length
Enter digit OK
refer to the PABX
OK
OK Select flash
and sending