Gigaset AS690IP User Manual page 13

Registration using user data
The wizard establishes a connection to the Gigaset configuration server on the Internet. Various
profiles with general configuration data for different providers can be downloaded here.
Select provider
A list of countries is loaded.
¤
. . . Use to select the country in which you want to use the phone
providers in this country is displayed
configuration data for your provider is downloaded and stored in the phone
If your provider does not appear in the list:
Terminate the wizard:
idle status
Entering user data for your IP account
You are required to enter your personal access data for your IP account, e. g. Name, Password,
. . . (depending on the provider).
¤
Enter registration data
Pay attention when entering access data, as it is case sensitive.
¤
To switch between lowercase, uppercase and number entry mode:
key
¤
To delete incorrectly entered characters:
¤
To navigate within an entry field:
Message on successful transfer: Your IP account is registered at your provider
Registration using an activation code
¤
. . . use to enter the auto configuration code (max. 32 characters)
required for IP telephony is loaded directly from the Internet onto your phone
Message on successful transfer: Your IP account is registered at your provider
The configuration file is transferred via a secure connection (TLS authentication). If the
TLS authentication fails, the Message key flashes
¤
. . . the message Certificate error - Please check your certificates in the Web
configurator. is displayed
Further information on the error can be found on page Security of the web
configurator.
If the configuration file fails to download (e.g. because the configuration server is not
available), the phone keeps trying to establish a connection until the file is
downloaded successfully to the phone.
The fixed line connection is assigned to the handsets as a send connection. Please change the
send connection to make calls over the Internet. For this, use the connection assistant (it is
started automatically) or the web configurator (
Press and hold the End call key
. . . set up the IP account using the web configurator (
confirm each entry using OK
end display: press the right Display key
. . . use to select provider
Press the display key
Press right/left on the control key
.
p. 64).
Getting started
OK . . . a list of
OK . . . the general
. . . the handset returns to
p. 63)
Press the
OK . . . all data
13