Gigaset AS690IP User Manual page 38

Additional functions
If you accept an incoming call, the baby monitor mode is suspended for the duration of the call,
but the function remains activated. The baby monitor mode is not deactivated by switching the
handset off and on again.
The handset should be positioned 1 to 2 metres away from the baby. The microphone
must point towards the baby.
Activating the function reduces the operating time of your handset. For that reason,
place the handset in the charging cradle if necessary.
The baby monitor is activated 20 seconds after switching on.
The answer machine for the destination number must be switched off.
After switching on:
¤
Test sensitivity.
¤
Test the connection, if the alarm is being forwarded to an external number.
Activating and setting the baby monitor
¤
Menu Baby Monitor
Enable/disable:
¤
Activation OK (
monitor is enabled immediately
Entering/changing call number:
¤
Call Target
phone number
Baby Monitor and the number to call are displayed when the baby monitor is enabled and in
idle mode.
Activate/deactivate two-way talk:
¤
Two-Way Talk
Deactivate baby monitor / Cancel alarm
Deactivate the baby monitor:
Cancel the alarm:
Deactivate the baby monitor remotely
The alarm is forwarded to an external destination number.
The receiving phone supports tone dialling.
¤
Accept alarm call
The baby monitor is deactivated and the handset is in idle status. The baby monitor settings
on the handset (e.g. no ringtone) will remain activated until you press the display key Off.
38
OK
= enabled) . . . if a phone number to call is already entered, the baby
OK Select Internal or External Call
OK
OK ( = enabled)
¤
In idle status press the display key Off
¤
Press the End call key
Press keys
OK for External Call, enter
during an alarm