Gigaset AS690IP User Manual page 14

Getting started
Send and receive connections
Assign the available phone connections (fixed line network, Gigaset.net and up to six IP
connections) to the end devices as receive and, where necessary, send connections. End devices
are the registered handsets.
•
Receive connection: Phone numbers you may be called on. Incoming calls are forwarded to
the end devices for which the relevant connection is assigned as receive connection.
•
Send connection: A line that you use for an outgoing call. The corresponding number will be
transferred to the recipient. You can assign each end device a number or the associated
connection as a send connection.
Each connection (number) of your phone can be both a send as well as a receive connection and
can be assigned to several end devices.
Default assignment
•
All configured connections are assigned to the handsets as receive connections on delivery.
•
The fixed line network connection is assigned to the handsets as a send connection. If you
have no fixed line network connection, no send connection is assigned.
The connection assistant is started automatically.
Select handset
Connections for INT 1:
¤
Answer question Assign connect. to INT1? with Yes
Connections for other handset :
¤
Answer question Assign connect. to INT1? with No . . . The handset with the next highest
number is offered
You can now change the default assignment one after the other for all registered handsets.
Changing the assignment
As soon as you have selected a handset, the receive connections assigned are displayed, e.g. IP1,
Fixed Line, Gigaset (for Gigaset.net).
¤
Use to scroll through the list
¤
Edit . . . The first receive connection is displayed
to this connection are forwarded to the handset )
a setting
Once you have assigned all receive connections:
¤
Continue with OK . . . The send connection assigned is displayed.
¤
Edit Use to select the connection
Your phone is now ready for use.
14
Use Yes or No to select (Yes = Calls
Select the connection and configure
Confirm the settings with OK
OK