Gigaset AS690IP User Manual page 23

¤
Menu Select Services
connection OK
Enable/disable:
Enter destination:
Setting a rule:
Enable a service:
Forwarding to internal party
¤
Menu Select Services
Enable/disable:
Enter destination:
Setting a rule:
Enable a service:
Any call that has been diverted is entered in the call lists.
Permit/block Call Waiting
During an external call, a call waiting tone indicates another external caller. If the number is
being transferred, you will see the number or the name of the caller on the display.
Enabling/disabling call waiting:
¤
Menu Select Services
Call Waiting Send . . . The request is sent to the provider
Call waiting is enabled/disabled for all connections to the phone and all registered handsets.
To enable/disable the function for the fixed line connection, the phone establishes a connection
to the exchange to send the relevant code.
¤
After confirmation from the fixed line network, press the End call key
Permit/block Call Transfer
During call swapping, in a conference call or in an external consultation call, two external parties
are connected to each other by hanging up.
¤
Menu Select Services
You can use the web configurator to make further settings for call transfer over a VoIP
connection (
OK
¤
Status: Use
¤
Phone number:
¤
When: Select with
All Calls
No Answer
When Busy
¤
Send
OK
¤
Status: Use
¤
To handset: Use
¤
Ring delay: Use
¤
Send
OK
OK
p. 67).
Call Divert OK
to select On/Off
Enter the number
All calls are forwarded immediately.
Calls are diverted if no one accepts the call within
several rings.
Calls are diverted if the line is busy.
Call Divert OK
to select On/Off
to select the handset
to select the delay time for accepting a call
Call Waiting OK
Transfer (ECT) OK (
Network services
Select the receive
Int OK
Use to enable/disable
= enabled)
23