Operation With A Pabx - Gigaset S850A GO User Manual

Operation with a PABX

Deactivate encryption
¤
use to select
Change ( = deactivated)
Registering a repeater
¤
Connect the repeater to the mains power supply
key on the telephone base station (min. 3 secs) . . . the repeater is automatically registered
It is possible to register more than one Gigaset repeater.
Repeater with encryption
Encryption is activated (default setting).
Registering a repeater
¤
Connect the repeater to the mains power supply
key on the telephone base station (min. 3 secs) . . . the repeater is automatically registered
Up to 2 repeaters may be registered.
The ECO DECT function Maximum Range is activated and the No Radiation function is
deactivated. The settings cannot be changed whilst the repeater is registered.
As soon as a repeater is registered, it will appear in the repeater list under
Settings System
De-registering a repeater
¤
. . . use
OK . . . use
Operation with a PABX
To find out which settings are required for a PABX, please refer to the PABX user guide.
You cannot send or receive SMS messages on PABXs that do not support Calling Line
Identification.
Setting Tone or Pulse dialling mode
¤
. . . use
Mode OK
Setting the flash time
¤
. . . use
. . . possible flash times are listed
82
Settings
Repeater
to select Settings
to select repeater
to select Settings
. . . use to select Tone or Pulse
to select Settings
. . . use
OK System
Press and hold the Registration/paging
Press and hold the Registration/paging
OK System
De-reg. Yes
OK Telephony
Select (
OK Telephony
to select flash time
OK Encryption
OK Repeater
OK Dialling
= selected)
OK Recall
Select ( = selected)
OK