Gigaset AS690IP User Manual page 41

Writing and sending SMS messages
An SMS may be up to 160 characters in length.
¤
Menu SMS
Write an SMS:
Send SMS:
Enter the number:
Send:
The number must include the local area code (even if you are in that area).
In the case of an external call, or if you interrupt writing by more than 2 minutes, the
text is automatically saved in the draft message list.
You can also send an SMS to an email address. In this case, put the email address at the
start of the message.
Sending SMS messages may incur additional costs. Please consult your network
provider.
Temporary storing of an SMS (draft message list)
You can temporarily store, change later and send SMS messages.
Saving SMS in the draft message list
¤
Menu SMS
Text
Opening and editing an SMS from the draft message list
¤
Menu SMS
Read draft:
Edit:
Send SMS:
Delete entry:
Delete all entries:
Receiving an SMS
New SMS messages are signalled on all Gigaset handsets by the
an advisory tone.
All received SMS messages are saved in the incoming message list. If an SMS is too long or is not
sent in full, it is split into individual messages. Since an SMS remains in the list even after it has
been read, you should regularly delete SMS messages from the list.
The display tells you if the SMS memory is full.
OK
¤
Write Message
¤
Menu Send Text
From the directory:
or use to enter it directly
If sending SMS messages to an SMS mailbox: add the mailbox ID to the
end of the number.
¤
Send Text
OK Write Message
OK Outgoing OK
¤
Read
¤
Menu Use text
¤
Menu Send Text
¤
Menu Delete Entry
¤
Menu Delete List
OK Enter the SMS text
OK SMS
Select the number
OK Enter the SMS text
Select draft
OK
OK
OK
OK OK
symbol (on the display) and
Additional functions
OK
OK
Menu Save
41