IMPORTANT
For technical data on which power sources are compatible with
the
requirements" (page
The Cisco FM3200 Base can be provided with power using the following
methods:
• A standard
(for example, from a compatible network switch).
• A compatible 48 Vdc passive PoE injector conforming to either
IEEE 802.3af
When providing the power source for the Cisco FM3200 Base, remember
the following important points:
• Install the power source as close to the unit as possible to minimize
voltage drop. The maximum suggested distance is 165ft (50m).
• Ensure proper grounding (earthing) and reliable connectivity by
using shielded CAT5/6 cables and connectors.
Connecting power to the Cisco FM3200 Base
NOTE
For detailed comparative information on which Cisco
hardware
through IEEE 802.3at or IEEE 802.3af power sources, or
through a DC IN power source, refer to
requirements" (page
Connecting power through a LAN Ethernet port
The Cisco FM3200 Base radio transceiver unit has two Ethernet ports
(Figure 7 (page
© 2021 Cisco and/or its affiliates. All rights reserved.
Cisco
FM3200
Base,
159).
IEEE 802.3af
Power-over-Ethernet (PoE) connection
or
IEEE
802.3at.
devices
are
159).
27)).
Hardware installation
refer
to
"Electrical
capable
of
accepting
"Electrical power
Page 26 of 176
power
power