The Device Status View; The Device Status Window - Cisco FM3200 Base Installation And Configuration Manual

6.7.5. The device status view

The device status window

The device status window contains information on basic Cisco device
settings (including the unit's MAC address), and controls that allow you to
download diagnostic data files and view device-event logs.
To use the status window, do the following steps:
• Click the -status link under MANAGEMENT SETTINGS in the
left-hand settings menu.
• The status dialog will be shown (below).
Figure 61. Configurator GUI (typical Status dialog)
© 2021 Cisco and/or its affiliates. All rights reserved.
Device configuration using the configurator interface
Page 135 of 176