Cisco FM3200 Base Installation And Configuration Manual page 60

Figure 26. Configurator GUI (Wireless Radio dialog)
2. Enter a defined network passphrase in the Shared Passphrase
field.
3. Specify the country in which the unit is installed by selecting the
correct option from the Country drop-down menu.
4. Specify the unit's operating frequency by clicking the correct
option in the Frequency (MHz) drop-down.
• You can change the frequency of each radio link in order to
minimize
© 2021 Cisco and/or its affiliates. All rights reserved.
Device configuration using the configurator interface
IMPORTANT
If a shared pass phrase is defined, the
same pass phrase must be used for all Cisco units
inthe same network.
The shared pass phrase can be composed of
anyASCII characters except the following: '`"\$=
CAUTION
Different countries frequently
telecommunications regulations. If the Country listing
is not set correctly, the unit may violate national
telecommunications legislation.
CAUTION
Make sure that the chosen country listing matches
the country in which the unit is installed before
changing the Frequency (MHz) value.
interference with
have differing
other wireless networks
Page 60 of 176