Cisco FM3200 Base Installation And Configuration Manual page 126

4. To show the password as it is being typed, check the Show
Password check-box.
5. Save the Viewmode Credentials settings by clicking the Change
button. Alternatively, clear the settings by clicking the Reset
button.
To change the View Mode settings, do the following steps:
1. Log in to the unit's Configurator GUI with Administrator
credentials. See
configuration" (page 42)
2. Click the -view mode settings link under MANAGEMENT
SETTINGS in the left-hand settings menu
Figure 55. Configurator GUI (VIEW MODE SETTINGS dialog)
• The VIEW MODE SETTINGS dialog will be shown.
3. To allow or prohibit access to any device-configuration settings,
click the relevant drop-down, and click the Disabled or Enabled
setting:
• If the Disabled option is selected for a device-configuration
setting, the setting for that category will be visible but not
accessible to ordinary users.
• If the Enabled option is selected for a device-configuration
setting, the setting can be modified by ordinary users.
© 2021 Cisco and/or its affiliates. All rights reserved.
Device configuration using the configurator interface
"Accessing the Cisco FM3200 Base for device
for more information.
(Figure 55 (page 126)).
Page 126 of 176