Logging Out; Viewing The End-User License Agreement - Cisco FM3200 Base Installation And Configuration Manual

1. Click the -reboot link under MANAGEMENT SETTINGS in the
left-hand settings menu.
• The unit reboot dialog will be shown
140)).
Figure 65. Configurator GUI (unit reboot dialog)
2. Reboot the unit by clicking the YES link. Alternatively, abort the
reboot by clicking the NO link.
• If the YES link was clicked, the unit will reboot.

6.7.8. Logging out

If clicked, the logout option logs the current user off the unit, and out of the
Configurator interface.
• To log out, click the -logout link under MANAGEMENT
SETTINGS in the left-hand settings menu.
• You will be logged off the unit and out of the Configurator
interface with no further prompting.
• The web browser will show the Authentication Required
dialog
log in again.
Figure 66. Web browser (Authentication Required
dialog)

6.7.9. Viewing the end-user license agreement

The License Agreement window contains the Cisco end-user
license agreement for the Cisco FM3200 Base, its firmware and control
software.
© 2021 Cisco and/or its affiliates. All rights reserved.
Device configuration using the configurator interface
(Figure 66 (page 140)). If needed, use the dialog to
(Figure 65 (page
Page 140 of 176