Initial Configuration With The Unit In Provisioning Mode - Cisco FM3200 Base Installation And Configuration Manual

2. Disable proxy connections by un-checking the check
3. Click the OK button.
4. Enter your user name and password in the device login
10. To ensure system security, change the default password when
the installation is completed. If the Sign in window does not
appear, refer to
password" (page

6.2.2. Initial configuration with the unit in Provisioning Mode

The Cisco FM3200 Base cannot be operated without entering some basic
configuration settings. These settings allow the unit to connect to a local
network and communicate with the network hardware.
If a new unit is being configured for use for the first time, or has been
reset to factory default configuration for any reason, the unit will enter
Provisioning Mode. This mode allows you to program the unit's initial
configuration settings.
If the unit is in Provisioning Mode, it will try to connect to the internet using
Dynamic Host Configuration Protocol (DHCP):
© 2021 Cisco and/or its affiliates. All rights reserved.
Device configuration using the configurator interface
boxes for the following options:
• Automatically detect settings
• Use automatic configuration script
• Use a proxy server for your LAN
window, and press 'Enter'.
"Changing the Administrator username and
127).
Page 46 of 176