• If connecting the PoE injector to a non-PoE switch or router
(above), no special precautions need to be taken.
Connecting power to the Cisco FM1200 Volo
NOTE
For detailed comparative information on which Cisco
hardware
through IEEE 802.3at or IEEE 802.3af power sources, or
through a DC IN power source, refer to
requirements" (page
Connecting power through a LAN RJ45 port
The Cisco FM1200 Volo radio transceiver unit has two Ethernet ports
(Figure 8 (page
Figure 8. Device connector ports
© 2021 Cisco and/or its affiliates. All rights reserved.
devices
are
158).
33)).
Hardware installation
capable
of
accepting
"Electrical power
Page 33 of 175
power