Table of Contents
Advertisement
Super X11DSF-E User's Manual
2.2 Motherboard Installation
All motherboards have standard mounting holes to fit different types of chassis. Make sure
that the locations of all the mounting holes for both the motherboard and the chassis match.
Although a chassis may have both plastic and metal mounting fasteners, metal ones are
highly recommended because they ground the motherboard to the chassis. Make sure that
the metal standoffs click in or are screwed in tightly.
Phillips Screwdriver (1)
Tools Needed
P1-DIMMF1
P1-DIMMF2
P1-DIMME1
P1-DIMME2
P1-DIMMD1 P1-DIMMD2
JGPW4
Location of Mounting Holes
Notes: 1) To avoid damaging the motherboard and its components, please do not use
a force greater than 8 lb/inch on each mounting screw during motherboard installation.
2) Some components are very close to the mounting holes. Please take precautionary
measures to avoid damaging these components when installing the motherboard to
the chassis.
Phillips Screws (14)
JVGA1
JUSB1
LEDM1
USB2/3
JLAN2
JSDCARD1
JBT1
JPQAT
BIOS LICENSE
BAR CODE
X11DSF-E
REV:1.00
IPMI CODE
DESIGNED IN USA
MAC CODE
SAN MAC
P1-DIMMA2 P1-DIMMA1
P1-DIMMB2
P1-DIMMB1
P1-DIMMC2 P1-DIMMC1
CPU1
FAN8 FAN7
FAN6
FAN5
22
JUIDB2
LED1
JIPMILAN
JLAN1
LED6
BT1
JUSBA1
USB7(3.0)
JSW0
PSU2
P2-DIMMF1
P2-DIMMF2
P2-DIMME1
P2-DIMME2
P2-DIMMD1 P2-DIMMD2
P2-DIMMA2
CPU2
FAN4 FAN3
Standoffs (14)
Only if Needed
PSU1
JGPW1
P2-DIMMA1
P2-DIMMB2
P2-DIMMB1
P2-DIMMC2
P2-DIMMC1
FAN2 FAN1
JGPW2
Advertisement
Table of Contents
