Supermicro X11DSF-E User Manual page 11

Quick Reference Table
Jumper Description
JBT1 CMOS Clear
JPB1 BMC Enable/Disable
JPG1 VGA Enable/Disable
JPQAT1 QAT Enable/Disable
JPQAT2 QAT Enable/Disable
JPL1 GLAN Enable/Disable
JP5 Hold power button before BMC ready
JPME2 Manufacturing Mode
JWD1 Watch Dog Timer Enable
LED Description
LED1 UID LED
LED6 CPLD Heartbeat LED
LEDM1 BMC Heartbeat LED
Connector Description
BT1 Onboard CMOS battery
FAN1 ~ FAN8 System/CPU fan headers (FAN1: CPU Fan)
JCOM1 COM port
JIPMILAN IPMI-Dedicated LAN port
JS1 (I-SATA0 ~I-SATA7) SATA 3.0 ports supported by Intel PCH
JF1 Front Control Panel header
JGPW1 - JGPW4 Power connectors used for GPU and VGA devices
JIPMB1 System Management Bus header for IPMI 2.0
JL1 Chassis intrusion header
JRK1 Intel RAID key header for NVMe Solid State Devices (SSD)
JSDCARD1 SD card socket
JSD1 - JSD2 SATA Disk-on-module (DOM) power connectors
JSW0/JSW1 Switch 1/2 I²C
JTPM1 TPM/PORT80 Trusted Platform Module/Port 80 connector
JUIDB2 Unit Identifier (UID) switch
JUSB3 USB4/5 (3.0) Internal USB header for two USB 3.0 connections (USB4/5)
JUSB1 USB2/3 (3.0) USB 3.0 rear port (USB2/3)
USB0/1 USB 2.0 header
JUSBA1 Type A USB 3.0 header
PSU1 Power Supply Unit 1
Default Setting
Open (Normal)
Pins 1-2 (Enabled)
Pins 1-2 (Enabled)
Pins 2-3 (Disabled)
when JPQAT1 is Enabled:
Pins 1-2 x16 Uplink
Pins 2-3 x8 Uplink (Disabled)
Pins 1-2 (Enabled)
Pins 1-2 (Enabled)
Pins 2-3 (Disabled)
Pins 1-2 (Normal)
Pins 1-2 (Reset)
Status
Solid Blue: Unit Identified
Blinking Green: Normal
Blinking Green: Normal
11
Chapter 1: Introduction