Table of Contents
Advertisement
Super X11DSF-E User's Manual
DIMM Installation
1. Follow the instructions given in the
memory population guidelines listed in the
previous section to install memory modules
on your motherboard. For the system
to work properly, please use memory
modules of the same type and speed on
the motherboard. (See the Note below.)
2. Push the release tabs outwards on both
ends of the DIMM slot to unlock it.
3. Align the key of the DIMM module with the
receptive point on the memory slot.
4. Align the notches on both ends of the
module against the receptive points on the
ends of the slot.
5. Use two thumbs together to press on both
ends of the module straight down into the
slot until the module snaps into place.
6. Press the release tabs to the lock positions
to secure the DIMM module into the slot.
DIMM Module Removal
Press the release tabs on both ends of the
DIMM socket to release the DIMM module from
the socket as shown in the drawing on the right.
Warnings: 1. Please do not use excessive force when pressing the release tabs on the ends
of the DIMM socket to avoid causing any damage to the DIMM module or the DIMM socket.
2. Please handle DIMM modules with care. Carefully follow all the instructions given on Page
1 of this chapter to prevent ESD-related damages to your memory modules or components.
JVGA1
LEDM1
BAR CODE
X11DSF-E
REV:1.00
IPMI CODE
DESIGNED IN USA
MAC CODE
SAN MAC
P1-DIMMF1
P1-DIMMF2
P1-DIMME1
P1-DIMME2
P1-DIMMD1 P1-DIMMD2
P1-DIMMA2 P1-DIMMA1
P1-DIMMB2
CPU1
JGPW4
FAN8 FAN7
FAN6
FAN5
Release Tabs
Press both notches
straight down into
the memory slot.
36
JUIDB2
LED1
JUSB1
USB2/3
JIPMILAN
JLAN2
JLAN1
JSDCARD1
LED6
BT1
JBT1
JPQAT
JUSBA1
USB7(3.0)
BIOS LICENSE
JSW0
PSU2
PSU1
P1-DIMMB1
P1-DIMMC2 P1-DIMMC1
P2-DIMMF1
P2-DIMMF2
P2-DIMME1
P2-DIMME2
P2-DIMMD1 P2-DIMMD2
P2-DIMMA2
P2-DIMMA1
P2-DIMMB2
P2-DIMMB1
P2-DIMMC2
P2-DIMMC1
CPU2
FAN4 FAN3
FAN2 FAN1
Notches
JGPW1
JGPW2
Advertisement
Table of Contents
