Table of Contents
Advertisement
X11DSF-E User's Manual
VMD Config for PStack1
Intel® VMD for Volume Management Device
Select Enable to use the Intel Volume Management Device Technology for this stack.
The options are Disable and Enable.
*If the item "Intel VMD for Volume Management Device" above is set to Enable,
the following items will be dislayed:
VMD port 2A (Available when the device is detected by the system)
Select Enable to use the Intel Volume Management Device Technology for this spe-
cific root port. The options are Disable and Enable.
VMD port 2C (Available when the device is detected by the system)
Select Enable to use the Intel Volume Management Device Technology for this spe-
cific root port. The options are Disable and Enable.
Hot Plug Capable (Available when the device is detected by the system)
Select Enable to enable hot plug support for PCIe root ports 2A~2C, which will allow
the user to change the devices populated on PCI-E Slots 2A~2C without turning off
the system. The options are Disable and Enable.
VMD Config for PStack2
Intel® VMD for Volume Management Device
Select Enable to use the Intel Volume Management Device Technology for this stack.
The options are Disable and Enable.
*If the item "Intel VMD for Volume Management Device" above is set to Enable,
the following items will be dislayed:
Hot Plug Capable (Available when the device is detected by the system)
Select Enable to enable hot plug support for PCIe root ports 3A~3D, which will allow
the user to change the devices populated on PCI-E Slots 3A~3D without turning off
the system. This will allow the user to replace the components without shutting down
the system. The options are Disable and Enable.
IIO-PCIE Express Global Options
The section allows the user to configure the following PCI-E global options:
90
Advertisement
Table of Contents
