Supermicro X11DSF-E User Manual page 87

Intel® VT for Directed I/O (VT-d)
Intel VT for Directed I/O (VT-d)
®
Select Enable to use Intel Virtualization Technology for Direct I/O VT-d support by report-
ing the I/O device assignments to the VMM (Virtual Machine Monitor) through the DMAR
ACPI tables. This feature offers fully-protected I/O resource sharing across Intel platforms,
providing greater reliability, security and availability in networking and data-sharing. The
options are Disable and Enable.
Interrupt Remapping
Select Enable for Interrupt Remapping support to enhance system performance. The
options are Enable and Disable.
PassThrough DMA
Use this feature to allow devices such as network cards to access the system memory
without using a processor. Select Enable to use the Non-Isoch VT_D Engine Pass
Through Direct Memory Access (DMA) support. The options are Enable and Disable.
ATS
Use this feature to enable Non-Isoch VT-d Engine Address Translation Services (ATS)
support. ATS translates virtual addresses to physical addresses. The options are Enable
and Disable.
Posted Interrupt
Use this feature to enable VT_D Posted Interrupt. The options are Enable and Disable.
Coherency Support (Non-Isoch)
Use this feature to maintain setting coherency between processors or other devices.
Select Enable for the Non-Iscoh VT-d engine to pass through DMA to enhance system
performance. The options are Enable and Disable.
Intel® VMD Technology

Intel® VMD for Volume Management Device on CPU1
VMD Config for PStack0
Intel® VMD for Volume Management Device
Select Enable to use the Intel Volume Management Device Technology for this stack.
The options are Disable and Enable.
87
Chapter 4: BIOS