on the supply voltage, the current intensity and
the type of power supply.
The rated voltage range for your vehicle can be
found on the information label in the socket
cover (
page 163).
/
Trailer hitch
General notes on the trailer hitch
Modifications to the engine cooling system may
be necessary, depending on the vehicle model.
The retrofitting of a trailer hitch is only permissi‐
ble if a towing capacity is specified in your vehi‐
cle documents.
Further information can be obtained at a quali‐
fied specialist workshop.
Mounting dimensions of the trailer hitch
1
Fastening points
2
Overhang dimension
3
Rear axle centre line
Technical data 353
The overhang dimension and fastening points
are valid for a trailer hitch installed at the fac‐
tory.
Model
All models
Towing capacity
The tongue weight is not included in the towing
capacity.
All models
Braked (at a minimum start-
off gradeability of 8%)
Braked (at a minimum start-
off gradeability of 12%)
Unbraked
2
2
Over‐
hang dimen‐
sion
1082 mm
1800 kg
1800 kg
750 kg