Mercedes-Benz EQC 350 4MATIC 2021 Owner's Manual page 206

To operate Active Distance Assist
#
DISTRONIC: press the rocker switches on
the steering wheel control unit up or down to
the desired position.
Switching between Active Distance Assist
DISTRONIC and the limiter
Press the I button.
#
Activating the variable limiter or Active Dis‐
tance Assist DISTRONIC
To activate without a stored speed: press
#
rocker switch 1 up M or down N, or
select J with the left rocker switch.
or
To activate with a stored speed: select
#
J with the left rocker switch.
Active Distance Assist DISTRONIC: remove
#
your foot from the accelerator pedal.
The current vehicle speed is stored and
maintained (Active Distance Assist
DISTRONIC) or limited (variable limiter) by
the vehicle.
Adopting a detected speed limit
Activate Active Distance Assist DISTRONIC.
#
If a traffic sign has been detected and is dis‐
#
played in the instrument cluster: select J
with the left rocker switch.
The maximum permissible speed on the traf‐
fic sign is adopted as the stored speed. The
vehicle adapts its speed to that of the vehicle
in front, but only up to the stored speed.
Pulling away with Active Distance Assist
DISTRONIC
Activate Active Distance Assist DISTRONIC
#
and remove your foot from the brake pedal.
Select J with the left rocker switch.
#
or
Depress the accelerator pedal briefly and
#
firmly.
The functions of Active Distance Assist
DISTRONIC continue to be carried out.
Deactivating Active Distance Assist
DISTRONIC
Driving and parking 203
& WARNING Risk of an accident due to
Active Distance Assist DISTRONIC being
active when you leave the driver's seat
If you leave the driver's seat while the vehicle
is being braked by Active Distance Assist
DISTRONIC only, the vehicle can roll away.
Always deactivate Active Distance
#
Assist DISTRONIC and secure the vehi‐
cle to prevent it from rolling away
before you leave the driver's seat.
Select O with the left rocker switch.
#
%
If you brake, deactivate ESP
intervenes, Active Distance Assist
DISTRONIC is deactivated.
Increasing/decreasing the stored speed
1 km/h: press rocker switch
#
down N to the pressure point, or press
and hold (increments of 1 km/h).
or
® ®
or if ESP
1 up M or