Diagnostics Connection - Mercedes-Benz EQC 350 4MATIC 2021 Owner's Manual

26
General notes
Car jack is intended solely for lifting of the con‐
crete car, in accordance with the instruction
label on the car jack.
3.
References of harmonized and other standards
or specifications
ISO 4063, EN ISO 14341-A, AS 2693, DBL
8230.10, DBL 7382.20, DBL 7392.10, DBL
8451.15, MBN 10435,
Technical documentation of the product is
stored at the premise of the manufacturer. The
person responsible for assembling the technical
documentation of the product: Head of the Tech‐
nical Department Brano a.s.
4.
Hradec nad Moravicí
Place
5.
05.10.2020
Date
Engineer Petr Petr
[Signature]
Director of division ZZ
TIREFIT kit
Copy and translation of the original declaration
of conformity:
EC declaration of conformity
In accordance with EC Directive 2006/42/EC
We hereby declare that the product
Product designation: Daimler electric air pump
Model designation: 0851ve, DT/UW 200046 -
IBK-LK2
MB part no.: A 000 583 8200
complies with the following relevant regulations:
2014/30/EU
Applied harmonised standards, in particular:
DIN EN 55014-1: 2012
DIN EN 55014-2: 2016
Manufacturer: Dunlop Tech GmbH
Address: Offenbacher Landstrasse 8, 63456
Hanau
Authorised representative: IMS dept.
Date: December 2019
Signature: IMS-AE, IMS-AE-L

Diagnostics connection

The diagnostics connection is a technical inter‐
face in the vehicle. It is used, for example, within
the scope of repair and maintenance work or for
reading out vehicle data by a specialist work‐
shop. Diagnostic devices should therefore only
be connected by a qualified specialist workshop.
& WARNING Risk of accident due to con‐
necting devices to the diagnostics con‐
nection
If you connect devices to the diagnostics
connection of the vehicle, the function of
vehicle systems and operating safety may be
impaired.
For safety reasons, we recommend that
#
you only use and connect products
approved by your Mercedes-Benz
service centre.