Mercedes-Benz EQC 350 4MATIC 2021 Owner's Manual page 220

System limits
The system may be impaired or may not function
particularly in the following situations:
If there is poor visibility, e.g. due to insuffi‐
R
cient illumination of the road, if there are
highly variable shade conditions or in rain,
snow, fog or heavy spray.
If there is glare, e.g. from oncoming traffic,
R
direct sunlight or reflections.
If the windscreen in the area of the multi‐
R
function camera is dirty, or if the camera is
misted up, damaged or covered.
If the traffic signs are hard to detect, e.g. due
R
to dirt, snow or insufficient lighting, or
because they are covered.
If the information in the navigation system's
R
digital map is incorrect or out-of-date.
If the signs are ambiguous, e.g. road signs in
R
roadworks or in adjacent lanes.
If you turn sharply when passing traffic signs
R
outside the camera's field of vision.
Setting Traffic Sign Assist
Requirements:
Only vehicles with Driving Assistance
R
Package:
Active Distance Assist DISTRONIC and ECO
Assist must be activated for the automatic
adoption of speed limits.
Multimedia system:
© Settings Assistance
4 5 5
Traffic Sign Assist
5
Activating or deactivating automatic adop‐
tion of speed limits (only vehicles with Driv‐
ing Assistance Package)
Select Adopt limit.
#
Switch the function on or off.
#
The speed limits detected by Traffic Sign
Assist are automatically adopted by Active
Distance Assist DISTRONIC.
% If one of the following systems is activated,
the detected speed can be manually adopted
as the speed limit:
Active Distance Assist DISTRONIC
R
Driving and parking 217
Cruise control
R
Variable limiter
R
Further information about Active Distance
Assist DISTRONIC: ( page 202).
/
Displaying detected traffic signs in the
media display
Select Display in head unit.
#
Switch the function on or off.
#
Setting the type of warning
Select Visual & audible, Visual
#
Setting the warning threshold
This value determines the speed at which a
warning is issued when exceeded.
Select Warning threshold.
#
Set the desired speed.
#
or Off.