Mercedes-Benz EQC 350 4MATIC 2021 Owner's Manual page 103

100 Seats and stowing
Configuring the seat settings
Multimedia system:
© Comfort Seat comfort
4 5 5
Adjusting the backrest contour in the lumbar
region of the seat backrest (lumbar)
Select Lumbar.
#
Select the settings Z for the desired seat.
#
Adjust the air cushions.
#
Adjusting the backrest side bolsters
Select Side bolsters.
#
Adjust the air cushion for the desired seat.
#
Selecting the massage programme for the
front seats
Multimedia system:
© Comfort Massage
4 5 5
Select Wave Massage or Pulsating
#
Start the program for the desired seat ;.
#
To set the massage intensity: switch
#
intensity on or off .
Resetting seat settings
Multimedia system:
© Comfort
4 5
Select ß for the desired seat.
#
Confirm the prompt.
#
Switching the seat heating on/off
& WARNING Risk of burns due to repeat‐
edly switching on the seat heating
Repeatedly switching on the seat heating can
cause the seat cushion and seat backrest
padding to become very hot.
In particular, the health of persons with limi‐
ted temperature sensitivity or a limited ability
to react to high temperatures may be affec‐
ted or they may even suffer burn-like injuries.
Do not repeatedly switch on the seat
#
heating.
Massage.
To protect against overheating, the seat heating
High
may be temporarily deactivated after it is
switched on repeatedly.
* NOTE Damage to the seats caused by
Seat comfort
5
When the seat heater is switched on, over‐
heating may occur due to objects or docu‐
ments placed on the seats e.g. seat cushions
or child seats. This could cause damage to
the seat surface.
#
Requirements:
The power supply is switched on.
R
objects or documents when the seat
heater is switched on
Make sure that no objects or docu‐
ments are on the seats when the seat
heater is switched on.