122 Seats and stowing
Further information on the declaration of
#
conformity for vehicle components which
receive and/or transmit radio waves.
Fitting/removing the floor mats
& WARNING Risk of accident due to
objects in the driver's footwell
Objects in the driver's footwell may impede
pedal travel or block a depressed pedal.
This jeopardises the operating and road
safety of the vehicle.
Stow all objects in the vehicle securely
#
so that they cannot get into the driver's
footwell.
Always fit the floor mats securely and
#
as prescribed in order to ensure that
there is always sufficient room for the
pedals.
Do not use loose floor mats and do not
#
place floor mats on top of one another.
Installing
Slide the corresponding seat backwards and
#
lay the floor mat in the footwell.
Press studs
1
onto holders 2.
#
Adjust the corresponding seat.
#
Removing
Pull the floor mat off holders 2.
#
Remove the floor mat.
#
Lay the remaining floor mats in the vehicle in a
form-locking manner.