Lennox LCH036 Installation Instructions Manual page 152

Power Exhaust Shipping Blocks
1- Open access panels on return end end of unit. See
figure 4.
ACCESS TO COMPRESSOR HAT SECTION AND INDOOR BLOWER SHIPPING BLOCKS
RETURN
AIR END
OF UNIT
COMPRESSOR HAT SECTION SHIPPING BLOCKS
(FRONT SIDE SHOWN)
REMOVE
SHIPPING
SCREW
REMOVE
SHIPPING
BLOCK
Note - Shipping blocks
are only present when
optional spring mounts
are installed.
FIGURE 5
FRONT SIDE OF UNIT SHOWN
INDOOR BLOWER
SHIPPING BLOCK ACCESS
(BOTH SIDES)
Blower Motor
Economizer
Section
REMOVE
SHIPPING
SCREWS
COMPRESSOR
HAT SECTION
OPTIONAL
SPRING
MOUNTS
2- Remove four shipping blocks and screws beneath the
power exhaust assembly frame as shown in figure 7.
Heat
Access
Section
Opposite
Side
FIGURE 4
INDOOR BLOWER SHIPPING BLOCKS
Note - Shipping blocks
are only present when
optional spring
mounts are installed.
OPTIONAL
SPRING MOUNT
(TYPICAL)
Page 8
COMPRESSOR HAT SECTION
SHIPPING BLOCK ACCESS
(BOTH SIDES)
Condenser Section
(BACK VIEW SHOWN)
REMOVE SHIPPING
BLOCKS AND SCREWS
(BACK SIDE)
FIGURE 6
LGH/LCH420, 480, 540, 600
INDOOR
BLOWER
FRAME
REMOVE SHIP­
PING BLOCKS
AND SCREWS
(FRONT SIDE)