Cleaning The Printer - Epson Stylus Pro 7000 Printer Manual

6-14 | Maintaining and Transporting the Printer
Caution
Be careful not to touch
the gears inside the
printer.
To avoid damaging the
components as well as
the case, never use
alcohol or thinners to
clean the printer.
Be careful not to get
water on the printer
mechanism or electronic
components.
Don't use a hard or
abrasive brush.
Don't spray the inside
of the printer with
lubricants; unsuitable
oils can damage the
mechanism. Contact
your dealer or a qualified
servicer if your printer
needs lubrication.
6. Click to close the Speed & Progress dialog box and return to the
OK
Utility menu. Then click

Cleaning the Printer

To keep your printer working at its best, you should clean it thoroughly
several times a year.
1. Make sure the printer is turned off and all the lights on the control panel
are off. Then unplug the power cord.
2. Open the roll paper cover and remove the roll paper spindle. Remove
any paper or other media from the printer.
3. Make sure the ink cartridge compartment is closed. Then use a soft
brush to carefully clean away any dust or dirt.
4. Open the lower cover and use a soft brush to carefully clean away any
dust or dirt inside the lower cover. Then close the cover.
5. If you're using the printer stand, first remove the paper hammock. Then
clean away any dust or dirt around the stand using a soft brush.
6. If the outer case is dirty, clean it with a soft, clean cloth dampened with
mild detergent. Keep the ink cartridge compartment closed to prevent
water from getting inside.
7. If the area under the roll paper cover accidentally gets soiled with ink,
wipe it off with a damp cloth.
8. To wash the paper hammock, remove the shafts, then machine wash
with mild detergent and air dry.
6-14
again to exit the Printers utility.
OK