Epson Stylus Pro 7000 Printer Manual page 102

6-10 | Maintaining and Transporting the Printer
Note
Be careful not to let the
cutter or the spring coil
pop out of the casing.
4. When the holder stops moving and
the display, open the lower cover by pulling down on the handles.
5. When
REPLACE CUTTER
casing. Push in the side pin while turning the paper cutter cover to the
right.
6. Slowly take your finger off the side pin. The paper cutter raises so it can
be removed.
6-10
OPEN LOWER COVER
appears on the display, you can open the
appears on