Selecting Registered Paper Settings - Epson Stylus Pro 7000 Printer Manual

2-22 | Handling Paper
5. Examine the printed pattern to determine which set of lines is the
straightest (shows the smallest gap), and note the corresponding
number.
In the sample pattern, the lines under number 4 are the straightest.
6. Press the or - button to select the number noted in step 5. Then press
+
the button.
Enter
7. Press the button.
Item
Press the or - button to select the time in minutes, then press the
+
button. Start with one minute. If ink still smears, increase the
Enter
drying time.
This is how long the printer will pause between pages (or before cutting)
to let the ink dry.
8. Press the button.
Item
you're registering very thin paper, press the
setting. Then press the
LOW
9. Press the or
Pause
menu.

Selecting Registered Paper Settings

Once you have registered a type of paper or other media, you can select it
whenever you print on that paper.
1. Press the
SelecType
the display.
2. Press the button. You see
Item
3. Press the or - button to select the registered number you want to use.
+
Then press the
Enter
4. Press the or
Pause
menu.
When you change media, make sure you select the correct setting.
If you are not sure what media setting is in effect, you can print a status
sheet, which shows the current settings. See page 5-4 for instructions.
2-22
DRYING TIME=0 MIN
SUCTION=NORM*
button.
Enter
button to exit the Paper Configuration
SelecType
button until
PAPER CONFIG. MENU
PAPER NUMBER=1.
button.
button to exit the Paper Configuration
SelecType
appears on the display.
appears on the display. If
or - button to select the
+
appears on