Checking Usb Installation (Windows 98); Setting Up Printer Sharing In Windows 95 And 98 - Epson Stylus Pro 7000 Printer Manual

1-12 | Connecting Your Printer and Installing Drivers

Checking USB Installation (Windows 98)

If you're using a USB connection, it's a good idea to confirm that the driver
is set up correctly after you install it. Follow these steps:
1. Click , point to
Start
EPSON
Stylus Pro 7000
2. Right-click the icon, then click
3. Click the
Details
following port.
You should see
EPUSBx: (EPSON Stylus Pro 7000)
the correct port displayed, see Chapter 7 in this guide or
"Troubleshooting" in the electronic Reference Guide on your printer
software CD-ROM.

Setting Up Printer Sharing in Windows 95 and 98

First, you need to set up the printer as a shared printer on the computer to
which it is connected. Then, you must specify the network path to the
printer from each computer that will use it.
Setting up the printer as a shared printer
Follow these steps to share a printer that is connected directly to your
computer with other computers on a network.
1. Click , point to
Start
2. Double-click
Network
3. Click the
File and Print Sharing
1-12
, and click
Settings
icon appears in the Printers window.
Properties
tab and note what is displayed under
, then click
Settings
.
button. You see the following:
. Make sure your
Printers
.
Print to the
. If you don't see
Control Panel.