Binary Triggers - Siemens SIMEAS R-PMU Manual

12
12.13 Transient Phasor Recorder (TPR)

12.13.3 Binary Triggers

All binary inputs of VCDAUs, VDAUs, CDAUs, DDAUs and BDAUs modules can be used as
binary trigger values.
Figure 12-34 TPR, Binary Trigger tab
Select the channel from the drop-down menu of the Channel box.
The Channel description and the Abbreviation that you have parameterized before are
displayed in the parameter box of the channel.
Activate or deactivate the Retrigger Blocking by clicking the appropriate radio button.
Activate the checkboxes Change to normal state and/or Change to alarm state.
Note
Change to alarm state means: A normally open contact (connected to an input parameterized
as normally open contact) is closed or a normally closed contact (connected to an input param-
eterized as normally closed contact) is opened.
Change to normal state means: A normally open contact (connected to an input parameterized
as normally open contact) returns to open or a normally closed contact (connected to an input
parameterized as normally closed contact) returns to closed.
170
Digital Fault Recorder, SIMEAS R-PMU, Manual
E50417-H1076-C360-A5, Release 10.2012