Electrical Tests - Siemens SIMEAS R-PMU Manual

16.1.7

Electrical Tests

Safety regulation
Protection class
Degree of protection
Flush-mounted housing:
Surface-mounted housing:
Clearances and creepage distances
Overvoltage category
Pollution degree
Insulation tests
Voltage test
(routine test)
Supply voltage
Voltage/current inputs
(VCDAU, VDAU, CDAU)
DC inputs
Binary inputs and
messages
Impulse voltage test
(type test)
Supply voltage and
voltage/current inputs
(VCDAU, VDAU, CDAU)
DC inputs, binary inputs
and messages
Digital Fault Recorder, SIMEAS R-PMU, Manual
E50417-H1076-C360-A5, Release 10.2012
16.1 Technical Data of the SIMEAS R-PMU
IEC 61010-1; EN 61010-1
IEC 61140; EN 61140
IEC 60529
Equipment: Front
Terminals
Terminals
Housing
Operator protection:
Equipment: Front
Terminals
Housing
Operator protection:
IEC 61010-1; EN 61010-1
III
2
IEC 61010-1; EN 61010-1
DC 3.1 kV
3.25 kV, 50 Hz
DC 2.0 kV
2.2 kV, 50 Hz
IEC 60255-5
μ
1.2/50 s; 0.5 J
6 kV
4 kV
IP31
IP21 (standard terminal)
IP11 (US terminal)
IP20
IP2x (standard terminal)
IP1x (US terminal)
IP31
IP21
IP21
IP2x
16
251