Operating the Cut Sheet Feeder
After stacking paper in the cut sheet feeder, turn on the printer and
make sure that the ON LINE light is on. In on line status, a new sheet
of paper loads automatically whenever a printable character or line
feed command is sent to the printer.
Paper out condition
When the printer is on line and receives print data from the
computer, the first sheet loads automatically. Subsequent sheets
load automatically as necessary.
In the cut sheet feeder mode, the PAPER OUT light goes on while
l
a sheet of paper is being fed, but the printer remains on line.
When the specified paper bin is empty, the printer automatically
l
goes off line, the PAPER OUT light goes on, and the beeper
sounds. To resume printing, add more paper and press the ON
LINE button.
Note: If you turn off your printer during the time the printer
detects a paper out or paper jam condition, any data
remaining in the printer's buffer is discarded.
Single-sheet Insertion
Your cut sheet feeder also has a single-sheet loading feature. This
feature is especially useful because it allows you to switch to a
different type or size of paper (for one sheet only) without replacing
the stack of paper in your cut sheet feeder.
Using the Printer Options
The Cut Sheet Feeder
5-11