Paper Handling - Epson LQ-510 User Manual

Paper Handling

The following section guides you through problems in handling
single sheets and continuous paper. If you are having problems
using the optional cut sheet feeder or pull tractor, see the section on
options later in this chapter.
Problem
Single sheets do not
feed properly.
LOAD/EJECT
The
button was pressed,
but the platen did not
move and
paper was
not fed.
7-14 Troubleshooting
Solution
You may be trying to feed paper using
one of the control panel buttons while the
printer is on line
ON LINE
Press the
printer off line; then feed the paper. After
feeding the paper, press the
button again to set the printer on line. See
Chapter 3.
The left edge guide may be set too far to
the right so that
sense it. Move the paper a little to the left.
PAPER OUT
The
(ON LINE
light is on).
button once to set the
ON LINE
the
paper detector cannot
light should go off.